User Manual Q&AAnswer
Feb 26, 2025 - 05:41 AM
To assemble the Target Sienna Queen Bed, please follow these steps:
1. Start by removing all wrapping material, staples, and packing straps from the outer carton.
2. Before beginning assembly, make sure you have all the required components as listed in the assembly guide.
3. Assemble the bed on a soft surface to protect its finish.
4. Begin by attaching the legs to the main frame. Insert the provided bolts into the designated holes and tighten them securely using the included Allen wrench or a suitable tool.
5. Once the legs are securely attached, position the headboard against the main frame. Align the pre-drilled holes on the headboard with the corresponding holes on the frame.
6. Insert the provided screws into the aligned holes and tighten them securely using the included screwdriver or a suitable tool.
7. Repeat the same process for attaching the footboard to the main frame.
8. After attaching the headboard and footboard, ensure that all bolts, screws, and knobs are firmly secured. Double-check for any loose connections and tighten them if necessary.
9. Once the bed frame is fully assembled, place the mattress on top. Ensure that the mattress fits securely within the frame.
10. Finally, ensure that the bed is placed on an even surface and is not dragged on wooden floors to prevent damage.
Please note that these instructions are a general guide. For more specific details and illustrations, refer to the Target Sienna Queen Bed Instruction Manual that came with your product.
Add New Comment