How do I install the Razor W15128785133 Rambler 16 Headlight Holder? (Razor W15128785133 Rambler 16 Headlight Holder Instruction Manual)

Answer

manuals.plus

Feb 26, 2025 - 05:13 AM


To install the Razor W15128785133 Rambler 16 Headlight Holder, please follow these steps:

Step 1: Using a 3 mm Allen wrench and an 8 mm wrench, loosen and remove the bolt and lock nut at the back of the headlamp. This will detach the headlamp from the bike.

Step 2: Using a Phillips screwdriver, remove the two (2) screws that hold the headlamp holder onto the front fork. This will detach the headlamp holder from the bike.

Step 3: Reverse the steps. Attach the headlamp holder onto the front fork using the two screws that were previously removed. Make sure the screws are tightened securely.

Step 4: Attach the headlamp back onto the headlamp holder. Align the holes on the headlamp with the holes on the holder and insert the bolt and lock nut. Use the 3 mm Allen wrench and 8 mm wrench to tighten the bolt and lock nut securely.

Please note that it is important to follow the instructions in the correct order to avoid any potential damage or injury. Additionally, it is recommended to charge the battery for 12 hours before using the headlight.

If you need further assistance, you can visit the Razor website at www.razor.com or call their toll-free number at 866-467-2967. Their customer support team is available Monday to Friday from 8:00 am to 5:00 pm Pacific Time.