User Manual Q&AAnswer
Feb 26, 2025 - 05:04 AM
To check the oil level in the DP-Gen-18Kw Propane Generator, follow these steps:
1. Make sure the engine is stopped and in a level position.
2. Unscrew the fuel cap and remove the oil dipstick.
3. Wipe the dipstick clean with a cloth or paper towel.
4. Fully insert the oil level dipstick back into the oil fill hole, then remove it again to check the oil level.
5. The oil level should be between the upper and lower limit marks on the dipstick.
6. If the oil level is too low, fill it with the recommended oil up to the upper limit mark on the dipstick.
It is important to use oils classified as SF, SJ, or higher for best performance. Other high-quality detergent oils are also acceptable. Do not use special additives.
Please refer to the DP-Gen-18Kw Propane Generator Owner's Manual for more detailed instructions and specifications.
Add New Comment