User Manual Q&AAnswer
Feb 26, 2025 - 04:56 AM
To properly install and use the Norauto NO1008 E-Ramp Alu Climbing Ramps, please follow the instructions provided in the installation manual. Here is a step-by-step guide:
1. Unboxing: Open the package and ensure that all the necessary components are included. The package should contain the climbing ramps and an installation manual.
2. Preparation: Before installation, make sure you have a suitable location to place the ramps. The surface should be flat, stable, and able to support the weight of your vehicle.
3. Positioning: Position the ramps in front of the wheels of your vehicle. Ensure that the ramps are aligned and parallel to each other.
4. Safety Precautions: Before driving onto the ramps, engage the parking brake and switch off the engine. Also, make sure there are no obstacles or loose objects in the vicinity of the ramps.
5. Driving onto the Ramps: Slowly drive your vehicle onto the ramps, ensuring that the wheels are centered and aligned with the ramps. Proceed with caution and maintain a steady speed.
6. Centering the Vehicle: Once your vehicle is on the ramps, make sure it is centered and balanced. Adjust the steering wheel if necessary to ensure equal weight distribution.
7. Parking and Securing: Once your vehicle is properly positioned on the ramps, engage the parking brake and switch off the engine. If desired, additional safety measures such as wheel chocks can be used to further secure the vehicle.
8. Maintenance and Cleaning: Regularly inspect the ramps for any signs of damage or wear. Clean the ramps using a mild detergent and water, and avoid using abrasive materials that may scratch the surface.
Please note that the above instructions are a general guideline. For specific details and safety precautions, refer to the Norauto NO1008 E-Ramp Alu Climbing Ramps Instruction Manual provided with the product.
Add New Comment