User Manual Q&AAnswer
Feb 26, 2025 - 04:53 AM
To install the Heller HSORH60 60CM Stainless Steel Slide Out Rangehood, follow these steps:
1. Ensure that the area where you will install the rangehood is clean to avoid suction of remaining bits of broken wood and dust.
2. The rangehood should be placed at a distance of 65-75 cm from the cooking surface for the best effect.
3. Drill 4 holes of Ø 5mm and one hole of Ø170mm at the bottom of the hanging cupboard according to the provided pictures in the manual.
4. Open the filters, keep the hood in line, insert screws and swelling rubber plug, and tighten the screws. Fix the filters.
5. After the hood has been hung, you can install the optional flexible outlet duct (Ø150 mm) to the vent on the top of the rangehood. If required, insert the second part of the flexible duct in the opening prepared in the wall.
6. Finally, plug the power cord into the wall outlet.
For more detailed instructions and illustrations, please refer to the installation section in the user manual provided with the rangehood.
Add New Comment