User Manual Q&AAnswer
Feb 26, 2025 - 04:32 AM
To install the ITT Industries GH31 Series Fixed Differential Regulator, follow these steps:
1. Ensure that the maximum supply and signal pressure does not exceed 100 PSI (690 kPa).
2. Connect the unit using the three 1/4" NPT connections. The inlet connection is marked "IN" and should be piped directly from the downstream side of the orifice. The bonnet connection should be piped from the upstream side of the orifice.
3. It is recommended to use a filtered air supply.
4. After installation, check all connections for leakage.
For more detailed information and dimensions, refer to the instruction manual provided by ITT Industries.
Add New Comment