User Manual Q&AAnswer
Feb 26, 2025 - 04:31 AM
To install the ITT Conoflow GH30 Series Back Pressure Regulator, follow these steps:
1. Ensure that the maximum inlet pressure does not exceed 150 PSI (1034 kPa).
2. The unit has two ¼" N.P.T. connections. The inlet connection is marked "IN".
3. It is recommended to use a filtered air supply.
4. Check all connections for leakage after installation.
5. Keep the adjusting xxxx well lubricated with grease.
For more detailed instructions and diagrams, please refer to the "Installation" section in the ITT Conoflow GH30 Series Back Pressure Regulator Instruction Manual.
Note: It is important to follow the installation instructions provided in the manual to ensure proper and safe operation of the back pressure regulator.
Add New Comment