Answer

Feb 26, 2025 - 04:25 AM
To pair the Lenco EPB-460 Wireless Earbuds with your mobile phone, follow these steps:
1. Power on the earphones by removing them from the charging base. The left side will blink blue and red alternately, while the right side will blink blue.
2. Turn on the Bluetooth function on your mobile phone.
3. Search for "Lenco EPB-460" in the Bluetooth settings of your mobile phone and select it to pair.
4. Once the pairing is successful, you will hear a voice prompt saying "connected" and the LED light on the earphones will switch to slow blink in blue.
Note: If the above pairing method doesn't work or if you want to reset the earphones, turn off the earbuds and then press and hold the buttons (1) and (2) on both sides simultaneously for 9 seconds until both sides flash. Then place the earphones back in the charging base. The next time you turn them off, the left and right earphones will be reconnected automatically.
If you encounter any issues during the pairing process, refer to the troubleshooting section in the user manual or contact the Lenco customer service for further assistance.
Add New Comment