User Manual Q&AAnswer
Feb 26, 2025 - 04:24 AM
To assemble the ROOM LIFE TRG 1850 5 Sienna King Bed, please follow these steps:
1. Carefully remove all wrapping material, staples, and packing straps from the outer carton.
2. Before starting assembly, make sure you have all the required components as mentioned in the assembly guide.
3. It is recommended to assemble the bed on a soft surface to protect its finish.
4. Begin by identifying the headboard, footboard, side rails, and support slats.
5. Attach the side rails to the headboard and footboard using the provided bolts, screws, or knobs. Make sure they are firmly secured.
6. Once the side rails are attached, position the support slats evenly across the bed frame.
7. Secure the support slats to the side rails using the provided hardware.
8. Double-check all the connections to ensure they are tight and secure.
9. Once assembled, place the mattress on the bed frame. It is important not to use the bed without a mattress.
10. Finally, ensure that the bed is placed on an even surface and not dragged on wooden floors.
Please note that these are general assembly instructions. For specific details and diagrams, refer to the instruction manual provided with your ROOM LIFE TRG 1850 5 Sienna King Bed.
Add New Comment