How do I install and set up the INOVANCE SV660P Single Axis Pulse Servo Drive? (INOVANCE SV660P Single Axis Pulse Servo Drive Owner's Manual)

Answer

manuals.plus

Feb 26, 2025 - 04:21 AM

Installation and setup of the INOVANCE SV660P Single Axis Pulse Servo Drive can be done following these steps:

1. Mounting: Choose a suitable location for the servo drive, ensuring it is securely mounted. The drive should be mounted vertically with sufficient clearance for cooling.

2. Power Connection: Connect the power supply to the drive using the appropriate power cables. Ensure that the power supply voltage matches the specifications of the drive.

3. Motor Connection: Connect the motor to the drive using the motor cables. Make sure to match the correct motor phases to the corresponding drive terminals.

4. Feedback Connection: Connect the feedback encoder to the drive using the feedback cables. Ensure that the feedback connections are properly aligned.

5. Communication Setup: If using the RS232 or RS485 communication ports, connect the corresponding cables to the drive and the PC or Modbus device.

6. Parameter Configuration: Use the provided commissioning software to configure the drive parameters. This software allows you to set various parameters such as motor type, current limits, speed loop response, and control mode.

7. Tuning: Use the STune and ETune software functions to fine-tune the drive for optimal performance. STune calculates the gains based on the set stiffness level, while ETune automatically adjusts the gain parameters for the best performance.

8. Cloning Parameters: If you have multiple SV660P drives in a machine, you can clone the parameters of one drive to others using the commissioning software. This simplifies the setup process and ensures consistency across all drives.

For more detailed instructions and information, please refer to the INOVANCE SV660P Single Axis Pulse Servo Drive Owner's Manual.