User Manual Q&AAnswer
Feb 26, 2025 - 04:20 AM
Installation of the nordlux IP S13 40 LED Picture Light is a straightforward process. Here are the steps to follow:
1. Before starting the installation, make sure to shut off power to the circuit. This is important for safety reasons.
2. The nordlux IP S13 40 LED Picture Light is designed for direct connection to the mains. It does not need to be connected to the yellow/green earth wire, as it is double-insulated (Class II).
3. Ensure that the lamp is suitable for outdoor use, as it has an IPX4 rating. This means it is protected against raindrops falling from any angle.
4. If the safety transformer of the lamp is broken, it must be replaced with an identical transformer. This is important for maintaining the safety and functionality of the lamp.
5. It is crucial to keep the mounting instruction provided with the product. Do not discard it, as it contains important information for installation and future reference.
6. Please note that in some countries, electrical installation work may only be carried out by an authorized electrical contractor. If you are unsure about the regulations in your area, it is advisable to contact your local electricity authority for advice.
For further information or any specific queries, you can visit the nordlux website at www.nordlux.com or contact Nordlux A/S directly at Østre Havnegade 34, 9000 Aalborg.
Please refer to the provided manual for detailed instructions and illustrations specific to the nordlux IP S13 40 LED Picture Light.
Add New Comment