User Manual Q&AAnswer
Feb 26, 2025 - 04:18 AM
To start the AL-KO 2500-C Power Generator, follow these steps:
1. Make sure the generator is placed in a well-ventilated outdoor area.
2. Check that the engine oil level is sufficient.
3. Unscrew the fuel filler cap and fill the tank with petrol.
4. Securely tighten the fuel filler cap.
5. If you have the AL-KO 6500-C model, connect the starter battery by attaching the red cable to the positive terminal and the green cable to the negative terminal.
6. Set the ignition circuit breaker to the "ON" position.
7. For a cold start, close the choke lever. For an operating temperature start, move the choke lever to the half-open position.
8. Pull the starter cable briskly, then allow it to wind back in slowly. Repeat if necessary.
9. Once the engine starts, release the ignition key (for AL-KO 6500-C) or move the choke lever to the open position.
10. The generator is now running and ready to provide power.
Please refer to the AL-KO 2500-C Power Generator Instruction Manual for more detailed instructions and safety precautions.
Add New Comment