User Manual Q&AAnswer
Feb 26, 2025 - 04:16 AM
To install the TRIO 652910131 TAURUS Ceiling Light LED, please follow these steps:
1. Before starting the installation, make sure to read the safety instructions provided in the instruction manual.
2. Ensure that the power supply is turned off before proceeding with the installation.
3. Locate a suitable location on the ceiling where you want to install the light fixture.
4. Remove the mounting plate from the ceiling light by unscrewing the screws or clips that hold it in place.
5. Connect the electrical wires from the ceiling to the corresponding wires on the light fixture. Make sure to match the colors of the wires (e.g., black to black, white to white).
6. Securely fasten the wires together using wire connectors or terminal blocks. Ensure that the connections are tight and insulated.
7. Attach the mounting plate back onto the ceiling, aligning it with the xxxx holes or clips. Use screws or clips to secure it in place.
8. Carefully attach the TRIO 652910131 TAURUS Ceiling Light LED to the mounting plate. Make sure it is properly aligned and securely attached.
9. Turn on the power supply and test the light fixture to ensure it is functioning correctly.
10. If necessary, adjust the direction or angle of the light by rotating or tilting the fixture.
Please note that these instructions are a general guideline, and it is always recommended to refer to the specific instruction manual provided with the product for detailed and accurate installation steps.
Add New Comment