User Manual Q&AAnswer
Feb 26, 2025 - 04:15 AM
According to the user guide, before using the Co-Dx COVID-R-001 Logic Smart COVID-19 RUO Product in the clean area, you need to clean the work surfaces properly. Here are the steps to clean the work surfaces:
1. Start by cleaning the work surfaces with water.
2. Then, use a solution of bleach that is more than 10% concentration to disinfect the surfaces. Make sure to apply the bleach after the water.
3. After applying the bleach, clean the surfaces again with water.
4. Finally, use a solution of 70% alcohol to further disinfect the surfaces. Apply the alcohol after the water.
It is important to follow this specific order of cleaning to ensure proper disinfection and degradation of nucleic acids. Alternatively, you can use another equivalent method of cleaning that achieves the same level of disinfection and nucleic acid degradation.
Please note that these cleaning steps are mentioned in the user guide to maintain a clean and controlled environment for accurate testing.
Add New Comment