User Manual Q&AAnswer
Feb 26, 2025 - 04:14 AM
To assemble the EKVIP 021817 Advent Star, please follow these steps:
1. Start by unpacking the product carefully. Do not connect it to the mains while still in the pack.
2. Locate the light source socket, which is an E14 socket. This is where you will insert the light source.
3. Ensure that the power cord is not damaged. If it is damaged, discard the complete product as the power cord is not replaceable.
4. Find a suitable location for the Advent Star indoors. It is designed for indoor use only.
5. Connect the Advent Star to the mains supply. Make sure the light fitting is not connected to the mains supply when inserting or removing the light source.
6. Insert the desired light source into the E14 socket. The product is adapted for light sources of energy class A++ to D.
7. Once the light source is inserted, you can switch on the Advent Star and enjoy its illumination.
Please note that these instructions are a general guide. For more specific details or troubleshooting, refer to the EKVIP 021817 Advent Star Instruction Manual provided by Jula.
Add New Comment