User Manual Q&AAnswer
Feb 26, 2025 - 04:13 AM
To assemble the EKVIP 021789 Advent Star, please follow these steps:
1. Start by unpacking the product carefully. Do not connect it to the mains while it is still in the pack.
2. Locate the main body of the Advent Star. It should have a diameter of 75 cm.
3. Find the power cord attached to the Advent Star. The cord length is 3.5 m and is not replaceable. If the cord is damaged, discard the complete product.
4. Identify the socket on the Advent Star. It uses an E14 socket, which is compatible with light sources of energy class A++ to D.
5. Begin by connecting the power cord to a suitable electrical outlet. Make sure the Advent Star is not connected to the mains supply during this step.
6. Once the power cord is connected, insert the light source into the E14 socket. Ensure that the light fitting is not connected to the mains supply when inserting or removing the light source.
7. After the light source is securely inserted, you can now connect the Advent Star to the mains supply.
8. The Advent Star is designed for indoor use only. It is not intended to be used as general lighting.
Please refer to the EKVIP 021789 Advent Star Instruction Manual for any additional information or specific instructions. You can also visit the website www.jula.com for the latest version of the operating instructions.
Add New Comment