User Manual Q&AAnswer
Feb 26, 2025 - 04:11 AM
To adjust the vibration intensity on the InnovaGoods Sauna Effect Vibrating Belt S, follow these steps:
1. Connect the belt to the mains power and ensure that a green LED is flashing.
2. Place the belt on the desired part of your body without tightening it too much. It can be used on shoulders, abdomen, back, waist, hips, thighs, and calves.
3. To access the vibration function in manual mode, press the ON button. The MODE indicator will light up with a continuous green LED.
4. Initially, the lowest intensity will be activated. To increase or decrease the vibration intensity, press the + and - buttons. The vibration intensity level will be reflected on the SPEEDLEVEL display.
Please note that the vibration function can also be used in automatic mode by pressing the SET button after turning on the device. In this mode, a pre-set vibrating pattern will start.
It is important to read and follow all the instructions and warnings provided in the user manual for safe and effective use of the product.
Add New Comment