User Manual Q&AAnswer
Feb 26, 2025 - 04:08 AM
To install the front wheel on the Jogger Push Chair, follow these steps:
1. Lay the Jogger on its back with the handle and rear axle touching the floor.
2. Place the red Safety Retainers onto each side of the wheel axle.
3. Slide the front wheel into the front-fork slots.
4. Install the M5 bolt and washer through the fork into the threaded hole on the red Safety Retainer on each side.
5. Insert the skewer through the wheel and install the black skewer nut. Tighten by turning the skewer lever.
6. Close the skewer lever, making sure it is flush with the tubing. Be careful not to over tighten.
Please refer to the user manual for visual illustrations and additional information on installing the front wheel.
Add New Comment