User Manual Q&AAnswer
Feb 26, 2025 - 04:04 AM
To calibrate the Linshang LS175 Colorimeter, follow these steps:
1. Power on the colorimeter by short pressing the power button.
2. Enter the "calibration" interface.
3. Perform the calibration operation as shown in the calibration animation, or you can skip the calibration if desired.
4. It is recommended to calibrate the colorimeter after a long period of non-usage.
5. Make sure the bottom cap is closed properly and clean the standard tile on the bottom cap if necessary.
6. If the calibration fails, it may be due to the attenuation of the light source. In this case, the colorimeter needs to be returned to the factory for inspection and repair.
Please refer to the user manual for more detailed instructions and illustrations on the calibration process.
Add New Comment