User Manual Q&AAnswer
Feb 26, 2025 - 03:54 AM
To fill the clean water tank of the BISSELL SC100 3378 Series Spot Extractor, follow these steps:
1. Remove the tank from the back of the machine by lifting the clean water tank carry handle.
2. Unscrew the black cap and remove the bottle insert.
3. Fill the tank with warm tap water (up to a maximum temperature of 140°F/60°C) to the water fill line.
4. Add the BISSELL Commercial cleaning formula up to the fill line (60 mL/2 oz).
5. Place the bottle insert back into the tank and tighten the black cap.
6. Place the tank back into the machine.
Note: It is important to use only BISSELL Commercial cleaning formulas intended for use with the carpet cleaning device to prevent internal component damage.
For more information and detailed instructions, please refer to the "Filling the Clean Water Tank" section in the user guide of the BISSELL SC100 3378 Series Spot Extractor.
Add New Comment