User Manual Q&AAnswer
Feb 26, 2025 - 03:51 AM
To adjust the water temperature on the WATERWARE FWCU8303 Cube Round Shower and Bath Mixer, follow these steps:
1. Turn on the hot and cold water supplies.
2. Lift the handle of the mixer to the desired water flow position.
3. Rotate the handle clockwise or counterclockwise to adjust the water temperature. Turning it towards the hot side will increase the temperature, while turning it towards the cold side will decrease the temperature.
4. Once you have set the desired temperature, leave the handle in that position for future use.
Please note that if the water temperature exceeds 55°C, it is recommended to install an approved tempering valve to prevent scalding. Additionally, always refer to the installation instructions and comply with the relevant local authority requirements for proper installation and usage of the product.
Add New Comment