User Manual Q&AAnswer
Feb 26, 2025 - 03:43 AM
To punch down cables to the Simply45 S45-2524 24 Port Loaded Patch Panel, follow these steps:
1. Refer to the TIA568A/B wiring instruction label on the patch panel. This label will guide you on how to punch down the cables correctly.
2. Start by preparing the cables. Strip off a sufficient amount of outer jacket from the cable ends, exposing the individual wires.
3. Arrange the wires according to the TIA568A or TIA568B wiring standard. The wiring standard you choose should match the one used for your network.
4. Take one cable at a time and align the wires with the corresponding color-coded slots on the 110/Krone IDC connectors on the rear of the patch panel.
5. Use a punch-down tool to firmly press down on each wire, ensuring it makes a secure connection with the IDC connector. Repeat this process for all the cables.
6. Once all the cables are punched down, write a description for each port on the provided label. This will help you identify the purpose or destination of each port.
7. Attach the plastic cover over the label to protect it and complete the installation.
If you need further assistance or have any other questions, you can contact Simply45 directly through their phone number or website provided in the manual.
Add New Comment