User Manual Q&AAnswer
Feb 26, 2025 - 03:41 AM
To adjust the temperature on the bewello BW2024 Electric Wall Fireplace, you can use either the touch screen on the panel or the remote control. Here are the steps:
1. Using the touch screen: Press and hold the "HEATER" button on the fireplace control panel for 3 seconds. The device will switch between Celsius (°C) and Fahrenheit (°F). The default temperature is 22°C (72°F).
2. Using the remote control: Press the "HEAT" button to switch between high, low, and off heating modes. After the first press, the display will show the current mode. Press it again to switch to the desired mode. If you press the button again, it will turn off the heating mode. The device will emit a signal after each change.
Note: The temperature can be adjusted within a range of 15°C (60°F) to 36°C (97°F). Press the up button to increase the temperature by 1°C/1°F, or press and hold the button for continuous increase. Press the down button to decrease the temperature by 1°C/1°F, or press and hold the button for continuous decrease.
Please refer to the instruction manual for more details and safety precautions.
Add New Comment