User Manual Q&AAnswer
Feb 26, 2025 - 03:38 AM
To connect the Thundercomm TurboX C865C Development Kit to your computer, follow these steps:
1. Connect BT/Wi-Fi Antenna 1 and BT/Wi-Fi Antenna 2 to the board via BT/Wi-Fi antenna slot 1 (connector 7) and BT/Wi-Fi antenna slot 2 (connector 8) respectively.
2. Connect the power adapter to the board.
3. Connect the board to your computer using a Type-C USB 3.0 cable through the Type-C USB 3.0 connector (connector 20).
Note: If debug function is necessary, you can use the UART debug connector (connector 5) instead.
4. Turn the Power switch (connector 19) to the DC IN position to boot up the device.
For further assistance or more detailed information, you can contact Thundercomm via email at service@thundercomm.com or visit their website at www.thundercomm.com for software and documentation downloads.
Add New Comment