User Manual Q&AAnswer
Feb 26, 2025 - 03:27 AM
To install the GALCO RSCG060696G RSCG Series Wiegmann Enclosure, please follow these steps:
1. Choose a suitable location for the enclosure, ensuring it is mounted on a wall.
2. Make sure the area is clear of any obstructions and is easily accessible for wiring.
3. Use the mounting holes located on the back of the enclosure to secure it to the wall using appropriate screws or bolts.
4. Ensure that the enclosure is level and securely fastened to the wall.
5. If required, use the knockouts located on the bottom of the enclosure to create cable entry points for your wiring.
6. Once the enclosure is securely mounted, place the slip-on removable cover over the enclosure.
7. Align the cover with the enclosure and use the screws located along the bottom edge to securely fasten the cover in place.
8. Ensure that the cover is tightly secured to prevent any water or moisture from entering the enclosure.
9. Verify that all connections and wiring inside the enclosure are properly installed and secured.
10. Finally, double-check that the enclosure is properly sealed and protected against rain, snow, and other environmental elements.
For more detailed instructions and safety precautions, please refer to the GALCO RSCG060696G RSCG Series Wiegmann Enclosures Owner's Manual.
Add New Comment