User Manual Q&AAnswer
Feb 26, 2025 - 03:26 AM
To install the DEVELCO PRODUCTS H6500220-1 Zigbee Range Extender, follow these steps:
1. Open the casing of the device by removing the xxxx at the bottom of the device.
2. Use the included screws to mount the range extender on the wall.
3. Attach the front cover to the device by hooking the front cover to the top of the mounted device and pushing the front cover against the device.
4. Insert a xxxx at the bottom of the device.
5. Insert the plug of the cable attached to the Zigbee Range Extender into a power socket.
6. When the device is powered up, it will start searching for a Zigbee network to join. The yellow LED will flash during this process.
7. Make sure that the Zigbee network is open for joining devices and will accept the range extender.
8. When the LED stops flashing, the Zigbee Range Extender has successfully joined the Zigbee network.
If the scanning for a Zigbee network times out, you can restart it by pressing the menu button on the device.
Please refer to the installation manual for more detailed instructions and safety precautions.
Add New Comment