User Manual Q&AAnswer
Feb 26, 2025 - 03:08 AM
To charge the TQ V01 360 Wh HPR Battery, follow these steps:
1. Connect the charger to the power supply.
2. Unfold the cover on the charging port located in the bike frame.
3. Check that the contacts in the charging port are clean. If necessary, clean them.
4. Align the charging plug of the charger or Range Extender with the charging port. Make sure the plug codes match.
5. Insert the charging plug into the charging port.
6. Monitor the charging process and never leave it unattended.
7. When charging is complete, pull the charging plug out of the charging port.
8. Close the cover on the charging port and disconnect the charger from the power supply.
Note: The Battery must be charged within the permissible temperature range of 0 °C to 40 °C (32 °F to 104 °F). The state of charge can be checked on the Display or on the 5 LEDs on the Battery. It is recommended to recharge the Battery immediately after complete discharge and to store it at approximately 30% to 60% charge. Only use the intended TQ charger to charge the Battery.
For more detailed information and safety instructions, please refer to the TQ V01 360 Wh HPR Battery User Manual.
Add New Comment