User Manual Q&AAnswer
Feb 26, 2025 - 03:05 AM
To reverse the door swing of your RCS REFR1A refrigerator, follow these steps:
1. Remove the three screws that hold the lower door hinge and keep the hinge for later use.
2. Remove the door from the upper pin and keep the padded surface upwards to prevent scratching.
3. Remove the upper hinge cover and the two screws holding the upper hinge. Save the hinge for later use.
4. Remove the hole cover and transfer it to the same location on the opposite side.
5. Insert the lower door hinge in the right side and fix it by tightening all the screws.
6. Remove the pin cap from the right side of the upper frame of the door and transfer it to the same location on the opposite side.
7. Put the door on the lower door hinge, keeping it level, and then fix the upper hinge to the body using the screws.
8. Put on the upper hinge cover.
Following these steps will allow you to reverse the door swing of your RCS REFR1A refrigerator.
Add New Comment