User Manual Q&AAnswer
Feb 26, 2025 - 02:53 AM
According to the user guide, before using the Co-Dx NAMe-R-001 Vector Smart North American Mosquito East RUO Product, it is recommended to clean the work surfaces in a clean area. The cleaning process involves using water, bleach, and alcohol. Here is the step-by-step process:
1. Clean the work surfaces in the following order: water, bleach, water, and alcohol.
2. Start by cleaning the work surfaces with water.
3. Then, use a solution of bleach that is more than 10% concentration to disinfect the surfaces. Ensure that the bleach is applied evenly and covers all areas.
4. After using bleach, rinse the surfaces with water again to remove any residue.
5. Finally, clean the surfaces with 70% alcohol to further disinfect and ensure a clean environment.
It is important to note that this cleaning process is recommended to disinfect the work surfaces and degrade any nucleic acids present. Following these cleaning instructions will help maintain a clean and contamination-free environment for using the Co-Dx NAMe-R-001 Vector Smart North American Mosquito East RUO Product.
Add New Comment