User Manual Q&AAnswer
Feb 26, 2025 - 02:53 AM
To set the thermostat temperature on the SmartGen HWP60A Forced Circulation Heater, follow these steps:
1. Press the "Set" button on the control panel. This will enter the setting interface.
2. The first digit of the thermostat temperature will start flashing. Use the "Turn Page" button to scroll through the available temperature options.
3. Once you have selected the desired temperature for the "OFF" setting, press the "Set" button again. The second digit will start flashing.
4. Use the "Turn Page" button to select the desired temperature for the "ON" setting.
5. Press the "Set" button again to save the thermostat temperature settings.
6. The LED display will return to showing the current temperature.
Please note that the default thermostat temperature range for the "OFF" setting is (40±2)ºC and for the "ON" setting is (25±2)ºC. You can adjust these values according to your specific requirements.
For more detailed information and illustrations, please refer to the "OPERATING INSTRUCTIONS" section of the SmartGen HWP60A Forced Circulation Heater User Manual.
Add New Comment