User Manual Q&AAnswer
Feb 26, 2025 - 02:25 AM
To install the battery cartridge into the Makita VR003G Cordless Concrete Vibrator, follow these steps:
1. Make sure the tool is switched off and the battery cartridge is removed before starting the installation process.
2. Open the battery case by pressing the buttons on the sides of the case.
3. Insert the battery cartridge into the tool, aligning its tongue with the groove on the tool. Make sure the red indicator on the battery cartridge is not visible, indicating that it is locked in place.
4. Close the battery case securely.
Please refer to the "Installing and removing battery cartridge" section in the instruction manual for more detailed instructions and illustrations.
Add New Comment