How do I set up QTX PAR-T Bar LED Party Bar and Stand Kit? (qtx PAR-T Bar LED Party Bar Stand Kit User Manual)

Answer

manuals.plus

Feb 26, 2025 - 02:11 AM

To set up the QTX PAR-T Bar LED Party Bar and Stand Kit, follow these steps:

1. Placement:
- Use the tripod fixing bracket to attach the bar to the included adjustable floor stand.
- Make sure the unit and stand are positioned away from walkways and places where it could be tripped on or knocked over.
- Alternatively, use the included mounting bracket to fix it to a stand or lighting truss.
- Keep the unit away from damp or dusty environments.

2. Usage Instructions:
- Connect the unit to the mains power supply and switch it on.
- Use the switch on the back of the unit to choose between auto and sound-to-light modes, or to turn off the power completely.
- Note: The supplied remote control will only work when the switch on the back of the unit is set to auto or sound-to-light modes.

3. Remote control:
- The PAR-T Bar comes with an IR remote control for quick access to extended functions.
- Aim the remote towards the front of the unit with a maximum range of approximately 4-5m.
- Here are the controls and functions available on the remote control:
- ON/OFF: Turns the remote control on or off.
- AUTO MIX: Activates the auto show mode.
- PAR: Activates the PAR auto-show mode.
- PAR: Activates the PAR sound active mode.
- LED: Activates the pattern auto-show mode.
- COLOR --: Decreases the speed of the auto show mode.
- MOTOR --: Decreases the speed of the effect motor.
- SEN --: Decreases the sensitivity of the sound active mode.
- SOUND MIX: Activates the PAR and effects sound active mode.
- PAR JUMP: Activates the PAR color change mode.
- GRADUAL: Activates the PAR color fade mode.
- LED: Activates the effect sound active mode.
- FLASH: Activates the PAR strobe mode.
- COLOR +: Increases the speed of the auto show mode.
- MOTOR +: Increases the speed of the effect motor.
- SEN +: Increases the sensitivity of the sound active mode.

4. Specifications:
- Power: AC110-240Vac, 50/60Hz
- Power consumption: 60W
- LED power: 14x 1W RGB LED + 2x 3x3W RGB LED Magic Ball
- Modes: Auto, sound activated
- Beam Angle: 25°
- Height adjustment: 710 to 1680mm
- Dimensions (PAR bar): 385 x 95 x 90mm
- Lead length: 2m
- Weight: 1.6kg

Please refer to the user manual for any additional information or troubleshooting tips.