User Manual Q&AAnswer
Feb 26, 2025 - 02:05 AM
To install the noka TECH Compact Pro 820 LED Grow Light, please follow these steps:
1. Prepare for installation by arranging the place where the fixture will be mounted. Ensure you have steel cables and appropriate hangers or tools to hang the fixture securely.
2. Remove the fixture from the packaging and check the contents. Make sure the power cord is not damaged and safe to use.
3. Switch off the main voltage before starting the installation.
4. Mount the fixture using the provided "V" metal hangers. It is recommended to place them on both ends of the fixture's housing to ensure the ideal horizontal position. If you choose to use only the middle hanging points, the fixture may not be properly balanced.
5. Connect the fixture with the power cable. Only then plug the power cable into the electrical socket.
6. Ensure there is at least 20cm (8in) of clearance on all sides of the fixture for proper cooling.
7. Control the temperature of the grow room by using mechanical ventilation or a cooling system to keep it below the maximum ambient operating temperature of 40°C (104°F).
8. Do not use sulfur vaporizers or water misters near the fixture, as they can decrease its efficiency.
For more detailed instructions and safety recommendations, please refer to the noka TECH Compact Pro 820 LED Grow Light User Manual.
Add New Comment