User Manual Q&AAnswer
Feb 26, 2025 - 02:01 AM
To charge the battery pack for the TORO 88602 Flex-Force Power System, follow these steps:
1. Ensure that the vents on the battery and charger are clear of any dust and debris.
2. Line up the cavity in the battery pack with the tongue on the charger.
3. Slide the battery pack into the charger until it is fully seated.
4. The LED indicator light on the charger will show the charging status:
- Off: No battery pack inserted.
- Green blinking: Battery pack is charging.
- Green: Battery pack is fully charged.
- Red: Battery pack and/or battery charger is over or under the appropriate temperature range.
- Red blinking: Battery pack charging fault.
5. Leave the battery pack in the charger until it is fully charged (indicated by a solid green LED light).
6. To remove the battery pack, slide it backward out of the charger.
It is important to charge the battery pack only in temperatures that are within the appropriate range specified in the manual. Charging time may increase if the battery is not charged within this range. Additionally, make sure to follow all safety precautions mentioned in the manual.
Please refer to the TORO 88602 Flex-Force Power System 60V MAX Battery Packs and Chargers Owner's Manual for more detailed information and safety instructions.
Add New Comment