User Manual Q&AAnswer
Feb 26, 2025 - 01:48 AM
To install the QAZQA 102445 Chalois WL Black 26, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before starting the installation, make sure to read and understand the safety instructions mentioned in the manual.
2. The luminaires should only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
3. Ensure that the electrical supply is switched off before starting any installation, maintenance, or repair work. It is recommended to switch off the power at the distribution box.
4. Take into account the minimal separation distance from other objects and the required room around the fitting. This will ensure proper ventilation and prevent any potential hazards.
5. Exterior lighting should not be installed during rain or in areas where direct contact with water is possible.
6. When connecting wires, refer to the symbols provided in the manual. L stands for Live, N stands for Neutral, and the symbol represents Earth.
7. Clamping screws in electrical connections must be adequately tightened, especially with 12V low voltage conductors.
8. If you need to replace a halogen lamp, make sure to wait for it to cool down for a minimum of 5 minutes before handling it.
9. When cleaning the luminaire, use a clean, dry cloth or brush. Do not use solvents or abrasives. Avoid dampness on all electrical components.
10. Take note of the technical information provided and follow the specifications for the type of lamp, maximum size and wattage, and the indicated voltage.
11. The luminaire can be used in combination with a dimmer if desired.
12. Dispose of the luminaire properly. It cannot be disposed of with normal domestic waste. Instead, bring it to a staging area for electrical waste.
If you have any further questions or doubts during the installation process, it is recommended to consult a professional, considering local installation requirements and regulations.
Add New Comment