User Manual Q&AAnswer
Feb 26, 2025 - 01:41 AM
To load a new film into the AGFAPHOTO 603000 Analogue Photo Camera, follow these steps:
1. Press latch A in the direction of the arrow and open flap B.
2. Lift the film rewind crank C and place a new film in the film chamber.
3. Push the rewind crank C back to its original position.
4. Hold the film cartridge lightly with your left thumb and pull the film strip out of the cartridge a little with your right hand.
5. Place the film strip on the film spool D.
6. Turn the transport wheel E several times in the direction of the arrow until the film strip hooks itself in the upper wheel El and the film spool D pulls in the film. Do not lift your left thumb from the film cartridge until this point.
7. Make sure that the film is flat against the center of the camera and close the flap.
8. Turn the transport wheel E until it clicks into place.
9. Press the shutter release button until the film counter F displays "1". The camera is now ready to take pictures.
Note: It is recommended to use the camera in sunshine or light cloudy weather. Keep at least 1 meter away from the subject and avoid direct sunlight into the camera lens. In cloudy weather or when shooting indoors, please use flash.
For further instructions on using the camera, refer to the user manual provided with the product.
Add New Comment