How do I adjust the seat depth on the JENX JUC21, JUC22, and JUC23 Seating System? (JENX JUC21 JUC22 JUC23 Seating System Instruction Guide)

Answer

manuals.plus

Feb 26, 2025 - 01:34 AM


To adjust the seat depth on the JENX JUC21, JUC22, and JUC23 Seating System, please follow these steps:

1. Locate the seat depth adjustment mechanism, which is usually located underneath the seat.

2. Depending on the model (JUC21, JUC22, or JUC23), the seat depth adjustment may be achieved by sliding the seat forward or backward, or by adjusting the position of a seat plate.

3. If the seat depth adjustment is achieved by sliding the seat, gently lift the seat slightly to release the locking mechanism, then slide the seat forward or backward to the desired position. Ensure that the seat is securely locked in place before use.

4. If the seat depth adjustment is achieved by adjusting a seat plate, locate the seat plate adjustment lever or  xxxx . Release the lever or turn the  xxxx  to unlock the seat plate. Adjust the seat plate forward or backward to the desired position, then secure it in place by re-engaging the lever or tightening the  xxxx .

5. After adjusting the seat depth, check that the seat is level and secure. Ensure that all locking mechanisms are engaged properly.

Please note that the specific instructions for adjusting the seat depth may vary slightly depending on the model and configuration of the JENX JUC21, JUC22, or JUC23 Seating System. It is always recommended to consult the product manual or contact JENX Limited directly for detailed instructions and support.