User Manual Q&AAnswer
Feb 26, 2025 - 01:31 AM
To assemble the GLOBAL INDUSTRIAL 320777 20 Gallons Portable Sandblaster, please follow these steps:
1. Connect the tank foot (Ref 24) to the tank (Ref 23) using the cotter pin (Ref 5).
2. Connect the axle support bracket (Ref 2) to the tank (Ref 23) using the hex bolt (Ref 6).
3. Assemble one side of the wheel axle assembly by inserting the washer (Ref 4), wheel (Ref 3), washer, and cotter pin (Ref 5) in the order shown in the manual.
4. Insert the axle (Ref 1) through the support brackets and assemble the other wheel assembly.
5. Attach the hose clamp (Ref 27) and abrasive hose (Ref 25) to the tee joint manifold (Ref 26).
6. Attach the tank handle (Ref 14) to the tank using the M6 bolt (Ref 18), washer (Ref 17), and nut (Ref 19).
7. Place the rubber seal (Ref 16) on top of the tee handle (Ref 15) and insert it into the tank.
8. Connect the blast gun (Ref 29) to the abrasive hose.
Please refer to the assembly instructions in the user manual for more detailed illustrations and explanations.
Add New Comment