Answer

Feb 26, 2025 - 12:55 AM
To pair your Bluetooth headphones with the SENNHEISER BTD 600 Bluetooth USB Adapter, please follow these steps:
1. Make sure that your Bluetooth headphones are ready for pairing. Refer to the instruction manual of your Bluetooth headphones for specific instructions.
2. Connect the SENNHEISER BTD 600 Bluetooth USB Adapter to your computer's USB port. You can use either a USB-A socket or a USB-C socket, depending on your computer's available ports. No driver installation is required.
3. Once connected, the SENNHEISER BTD 600 Bluetooth USB Adapter will automatically enter pairing mode and search for Bluetooth headphones to pair with. The status LEDs on the dongle housing will alternately flash red and white.
4. If the dongle does not automatically enter pairing mode, you can manually trigger the pairing mode by pressing the pairing button on the dongle for 3 seconds.
5. When the dongle is successfully paired with your Bluetooth headphones, the status LEDs on the dongle housing will flash white 3 times.
6. The dongle will save the connection profile of the paired Bluetooth headphones in its pairing list. When you reconnect the dongle to your computer, it will automatically try to reconnect to the paired Bluetooth headphones.
Note: The dongle can only save one connection profile. If you want to pair the dongle with another pair of Bluetooth headphones, you will need to manually trigger the pairing mode again, which will overwrite the last saved pairing profile.
For more information and troubleshooting, you can refer to the SENNHEISER BTD 600 Bluetooth USB Adapter Instruction Manual.
Add New Comment