User Manual Q&AAnswer
Feb 26, 2025 - 12:53 AM
To secure the Regency 600DOS1230 Series Overshelf to your table, follow these steps:
1. Align the two L-brackets (A) with the back of the table and pre-drill holes through the side of the tabletop for screws. Make sure the L-brackets are positioned correctly before drilling.
2. xxxx the L-brackets into the table using appropriate screws. Please note that screws are not included with the product, so you will need to provide your own.
3. Secure the four legs (B) to the L-brackets using the Allen wrench and set screws (C) provided. Insert the set screws into the holes on the legs and tighten them using the Allen wrench. This will firmly attach the legs to the L-brackets.
4. Slide the midshelf (D) into place between the legs and secure it using the set screws. Insert the set screws into the holes on the legs and tighten them to hold the midshelf securely in place.
5. Finally, add the overshelf top (E) and secure the legs into the gussets with the set screws. Insert the set screws into the holes on the legs and tighten them to ensure the overshelf top is firmly attached. If any of the set screws struggle to go in, you may need to loosen them slightly before tightening again.
By following these steps, you will be able to securely attach the Regency 600DOS1230 Series Overshelf to your table.
Add New Comment