User Manual Q&AAnswer
Feb 26, 2025 - 12:51 AM
The SKYRC T400Q AC/DC Quattro Balance Charger/Discharger allows you to charge four batteries of different chemistries simultaneously. Here's how you can use the charger to charge multiple batteries at the same time:
1. Connect the charger to a power source using either the AC input (100-240V) or the DC input (11-18V).
2. Select the appropriate battery type for each battery you want to charge by pressing the INC and DEC buttons. The charger supports LiPo, LiFe, Lilon, LiHV, NiMH, NiCd, and Pb batteries.
3. Press the PORT button to switch between the four independent ports (A, B, C, D) on the charger. Make sure to connect each battery to the corresponding port.
4. Set the desired charging current for each battery by pressing the ENTER/Start button to make the current value blink, and then use the INC and DEC buttons to adjust the value. Follow the instructions provided by your battery manufacturer for the recommended charging current.
5. Once you have set the charging current for each battery, press and hold the ENTER/Start button for 3 seconds to start the charging process.
6. The charger will monitor and balance each battery cell individually during the charging process. Real-time information such as battery voltage, charging current, elapsed time, and charged capacity will be displayed on the LCD screen.
7. When the charging process is complete, the screen will display "END: FINISH" and the charger will emit a ringing sound. You can then disconnect the fully charged batteries from the charger.
Note: It is important to read the manual thoroughly and follow the safety instructions to ensure safe and proper usage of the charger.
Add New Comment