User Manual Q&AAnswer
Feb 26, 2025 - 12:48 AM
Installation of the QAZQA 92621 New Haven WL Antique Romantic Outdoor Wall Light is relatively straightforward. Here are the steps to follow:
1. Determine the desired location: Choose a suitable outdoor wall where you want to install the light fixture. Ensure that there is a power source nearby.
2. Turn off the power: Before starting the installation, switch off the power supply to the area where you will be working. This step is crucial for safety.
3. Mounting the fixture: Take the fixture and hold it against the wall in the desired position. Mark the positions for the xxxx holes using a pencil or marker. Ensure that the fixture is level.
4. Drilling holes: Using an appropriate drill bit, carefully drill holes at the marked positions on the wall. Be cautious not to damage any electrical wiring or pipes behind the wall.
5. Wiring connection: Connect the wires from the light fixture to the corresponding wires from the power source. Follow the manufacturer's instructions or consult a qualified electrician if you are unsure about the wiring connections.
6. Mounting the fixture: Once the wiring is complete, align the xxxx holes on the fixture with the drilled holes on the wall. Insert screws through the holes and tighten them securely to mount the fixture.
7. Power on and test: After the fixture is securely mounted, turn on the power supply and test the light to ensure it is functioning correctly.
Please note that the above instructions are a general guideline. It is always recommended to refer to the specific instruction manual provided with the QAZQA 92621 New Haven WL Antique Romantic Outdoor Wall Light for detailed installation steps and safety precautions.
Add New Comment