User Manual Q&AAnswer
Feb 26, 2025 - 12:35 AM
To install the Lightcloud LCBT8-14-48P-8TW-DIR-SS LED Linear T8 Tube Ballast Compatible, follow these steps:
1. Turn off power: Place the wall switch in the off position and turn off the main power at the breaker panel or remove the fuse from the fuse box.
2. Find a suitable location: The Lightcloud Blue devices should be positioned within 60 ft. of each other. If there are building materials such as brick, concrete, or steel construction, additional Lightcloud Blue devices may be required to extend around an obstruction.
3. Remove lens or diffuser (if applicable): Remove the existing fluorescent lamps from the luminaire.
4. Insert the LED lamp: Bring the LED lamp to the luminaire and insert the lamp pins into the luminaire lamp holders. Rotate the LED lamp until it locks in place. Ensure that the LED lamp front points away from the back of the luminaire.
5. Place lens or diffuser back in place (if applicable).
For more detailed instructions and illustrations, please refer to the Lightcloud LCBT8-14-48P-8TW-DIR-SS LED Linear T8 Tube Ballast Compatible User Manual.
Note: It is important to follow all safety precautions mentioned in the manual, such as disconnecting power before installation and not using the lamp in wet locations or with standard dimmers and emergency ballasts.
Add New Comment