User Manual Q&AAnswer
Feb 26, 2025 - 12:26 AM
To change the batteries in the General Life Mitra 110S Digital Room Thermostat, follow these steps:
1. Power off the device connected to the Room Thermostat and ensure that the energy is cut off.
2. Press the screwdriver forward from the space shown in the picture provided in the manual.
3. Bend the tabs and separate the front cover from the thermostat.
4. Insert 2 new AAA alkaline batteries in the battery housing with the correct battery direction.
5. Replace both batteries at the same time.
6. Align the front part of the Room Thermostat with the back and squeeze it towards the back.
7. Ensure that the front cover is securely attached to the thermostat.
It is important to note that when the product is not used for a long period (more than 15 days), it is recommended to remove the batteries to avoid any potential malfunctions. Please dispose of dead batteries properly by throwing them into a waste bin for batteries.
For more detailed instructions and illustrations, refer to the "BATTERY PLACEMENT" section in the General Life Mitra 110S Digital Room Thermostat User Manual.
Add New Comment