Answer

Feb 26, 2025 - 12:02 AM
To install the MokerLink 48 Port Gigabit PoE Switch to a desktop, follow these steps:
1. Attach the four non-slip rubber footmats that came with the device to the bottom four corners of the switch.
2. Place the switch on a horizontal desktop in a well-ventilated area.
3. Insert the data cable into the network port. When you hear a clear click, it indicates that the crystal head is successfully connected with the network port of the switch. Plug in all the network cables of the network equipment in the same way.
4. Connect the power to the switch.
Please refer to the "Install to desktop" section in the user manual for visual instructions and additional details.
Note: Ensure that the installation position of the switch has proper ventilation and heat dissipation conditions. Keep the power off during installation to avoid potential safety hazards. Install the switch on a stable plane to avoid falling and damage.
Add New Comment