User Manual Q&AAnswer
Feb 25, 2025 - 11:26 PM
To install the LUMENA 6074582 Olympia Professional Solar Wall Light, follow these steps:
1. Choose a sunny location for installation, preferably facing south.
2. Remove the backing plate/mount from the body of the light by unscrewing the dome nuts at the front.
3. Use the plate to mark the mounting holes on the desired location of the mounting surface. Use a spirit level to ensure the holes are straight.
4. Remove the mounting plate and drill out the 4 holes marked. Use screws/wall plugs that are appropriate for the mounting surface and have a head/washer larger than 8mm. The maximum xxxx size is M7.
5. Attach the mounting plate securely to the surface using the selected screws.
6. Place the wall light back onto the mount, pushing the threaded bars through the holes.
7. On each side, replace the large flat washer, followed by the split/lock washer, and then the dome nuts. Tighten them securely using a spanner, leaving a gap between the spanner and the back mount cover to avoid scratching.
8. Fully tighten the dome nuts with a spanner.
For more detailed instructions and illustrations, please refer to the LUMENA 6074582 Olympia Professional Solar Wall Light User Manual.
Note: It is important to ensure the installation location is free from shade and other lights that could interfere with the solar light's operation.
Add New Comment