User Manual Q&AAnswer
Feb 25, 2025 - 11:25 PM
To adjust the fan speed on the Origo CF1517 3D Convection Stand Fan, you can use either the control panel on the fan itself or the remote control. Here are the steps:
1. Place the fan on a stable and flat surface and plug the power cord into a 220-240V 50-60Hz electrical outlet.
2. Press the POWER button to turn the fan on. The fan will start at speed 3.
3. Press the SPEED (+) or (-) button on the control panel or remote control to adjust the fan speed to the desired level. There are 8 levels of speed to choose from (1 to 8). The current speed setting will be displayed on the LED light.
4. If you want to set the fan to the highest speed called "Gale," press the SPEED button until it reaches "Gale" speed. After 3 minutes, the fan will automatically return to the previously set speed from "Gale" speed to continue operating.
Note: The natural wind mode is also available on this fan. In natural mode, different speed levels simulate different natural wind strengths. You can adjust the speed in natural mode using the SPEED (+) or (-) button.
Please refer to the instruction manual for more details and illustrations on the function settings of the Origo CF1517 3D Convection Stand Fan.
Add New Comment