How do I assemble the Earthwise SN70016 16Inch Snow Thrower? (EARTHWISE SN70016 16Inch Snow Thrower Owner's Manual)

Answer

manuals.plus

Feb 25, 2025 - 11:24 PM


To assemble the Earthwise SN70016 16Inch Snow Thrower, follow these steps:

1. Handle: Slide the lower section of the handle into the upper section and secure them together with the provided bolt and wing nut.

2. Motor housing: Connect the socket to the plug on the motor housing and secure the upper cover to the motor housing with the provided screws.

3. Adjust  xxxx : Align the rib on the spindle with the notch on the adjust  xxxx  and push the adjust  xxxx  onto the spindle. Secure the  xxxx  with the provided  xxxx  and place the adjust  xxxx  cover on top.

4. Wheel: Remove the screws and washers from the wheel bracket. Install the wheels and secure them with the washers and screws. Push the wheel covers into place.

5. Wheel bracket: Align the holes on the wheel bracket with the holes on the upper cover. Secure the bracket into place with the provided screws.

6. Auxiliary handle: Position the auxiliary handle so that the holes align with the holes in the handle support bracket. Insert the provided bolt into the bracket and secure it with the wing nut. Adjust the angle and height of the handle to a comfortable position and tighten the wing nut.

7. Connecting the electrical cord: Loop the extension cord and feed it through the rear handle. Rest the cord around the cord hook to prevent accidental disconnection during operation.

Please refer to the owner's manual for detailed instructions and illustrations on how to assemble the Earthwise SN70016 16Inch Snow Thrower.