User Manual Q&AAnswer
Feb 25, 2025 - 11:20 PM
To adjust the speed of the Origo CF-1318R 3D Convection Fan, you can use either the control panel on the fan itself or the remote control. Here are the steps:
1. Using the control panel:
- Make sure the fan is plugged into a 220-230V~, 50Hz electrical outlet.
- Press the POWER button to turn on the fan at low speed.
- Press the SPEED button to cycle through the different speed levels: Breeze, Low, Medium, or High. The current speed setting will be displayed on the LED display.
2. Using the remote control:
- Ensure that the remote control has a 3V Lithium battery installed correctly.
- Point the remote control towards the fan.
- Press the POWER button on the remote control to turn on the fan at low speed.
- Press the SPEED button on the remote control to adjust the fan speed to the desired level: Breeze, Low, Medium, or High. The current speed setting will be displayed on the LED display.
Remember to keep the fan clean and unplugged from the power source before performing any maintenance or cleaning tasks. For more detailed instructions and safety information, please refer to the Origo CF-1318R 3D Convection Fan Instruction Manual.
Add New Comment