How do I install the Paulmann 937.74 Solar LED Einbau? (Paulmann Solar LED Einbau Instructions Manual)

Answer

manuals.plus

Feb 25, 2025 - 11:17 PM


Installation of the Paulmann 937.74 Solar LED Einbau is a relatively simple process. Here are the steps to follow:

1. Open the package and ensure that all the necessary components are included. The exact contents may vary, but typically, you should find the solar LED light, mounting screws, and any additional accessories.

2. Choose a suitable location for the solar LED light. It should be a spot that receives ample sunlight during the day for optimal charging. Ensure that there are no obstructions that could block the solar panel.

3. Use the provided screws to mount the solar LED light to the desired surface. Make sure it is securely attached.

4. If the solar LED light has a separate solar panel, position it in a location that receives maximum sunlight. Connect the solar panel to the light using the provided cable.

5. Once the solar LED light is installed, allow it to charge in direct sunlight for a full day before using it. This will ensure that the battery is fully charged and ready for operation.

6. After the initial charge, you can turn on the solar LED light using the switch or button provided. The light should automatically turn on at dusk and turn off at dawn, utilizing the stored solar energy.

Please note that these instructions are a general guideline, and it's always recommended to refer to the specific manual provided with the product for detailed installation steps and safety precautions.